Item #: P42C77-MT
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 11/2010
General Assembly Guidelines
I.
Ensure that all parts and hardware are available before beginning assembly.
Follow each step carefully to ensure the proper assembly of this product.
Two people are recommended for ease in the assembly of this product.
II.
III.
IV.
The four main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.
V.
The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI.
A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2
Hardware List
Cam lock
Cam bolt
Wood dowel
Glue tube
Bolt
Wrench
Door stopper
Small round head screw
Shelf support pin
Door stopper plate
Small screw
Door hinge
Large screw
Handle
Large round head screw
Medium screw
Plastic wedge
Sticker
TV Mounting Parts List
TV Mounting Hardware List
Bolt
Washer
Adjustment knob
Wrench
P.5
Screw cam bolts (B) into stand top (1). Attach door stoppers (G) to stand top (1) using small round head
screws (H).
Screw cam bolts (B) into panels (3,4,5,6). Note that a cam bolt will be screwed into each side of panels (5,6).
Insert dowels (C) into panels (3,4,5,6), slat (7) and shelves (9).
P.6
Insert dowels (C) into shelves (13) and panels (14,15,17,18). Screw cam bolts (B) into panels (14,15,17,18).
Screw cam bolts (B) into doors (16,19). Attach door stopper plates (J) to doors (16,19) using small screws (K).
Attach handles (N) to doors (16,19) using large round head screws (P).
P.7
Insert dowels (C) into feet (20) and back panel (10).
Attach panels (14,15) to shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves
(13) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf.
P.8
Attach panels (17,18) to the second set of shelves (13) using cam bolts and dowels as guides. Insert cam
locks (A) into shelves (13) and tighten with a screwdriver. Note that two cam locks will be inserted into each
shelf.
Attach the shelf assembly from the previous step to door (19) using cam bolts and dowels as guides. Insert
cam locks (A) into panels (17,18) and tighten with a screwdriver.
P.9
Attach the shelf assembly from Step 6 to door (16) using cam bolts and dowels as guides. Insert cam locks (A)
into panels (14,15) and tighten with a screwdriver.
Insert cam locks (A) into slat (7). Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Tighten
cam locks (A) with a screwdriver.
P.10
6
Attach shelf (9) to panel (5), then panel (3) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
6
Attach shelf (9) to panel (6), then panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
P.11
1
Attach the panel assembly from the previous step to stand top (1) using cam bolts and dowels as guides.
Insert cam locks (A) into panels (3,4,5,6) and tighten with a screwdriver. Note that two cam locks will be
inserted into each panel.
Carefully slide back panel (10) into place along the back of the stand assembly. Use cam bolts and dowels as
guides. Insert cam locks (A) into back panel (10) and tighten with a screwdriver.
P.12
Carefully slide back panels (11) into place along the grooves at the back of the stand assembly.
Attach stand supports (21) to stand base (2) using bolts (E). Tighten bolts (E) with wrench (F).
P.13
2
Attach stand base (2) to the stand assembly using bolts (E). Tighten bolts (E) with wrench (F).
2
Attach feet (20) to stand base (2) using dowels as guides.
P.14
Attach door hinges (L) to the door assemblies from Steps 8 and 9 using large screws (M).
Attach door assembly (14,15) to the stand assembly at door hinges (L) using large screws (M).
P.15
Attach door assembly (17,18) to the opposite side of the stand assembly at door hinges (L) using large screws
(M).
Insert shelf support pins (I) into the stand assembly at desired shelf heights. Carefully slide shelves (8) into
place resting on shelf support pins (I).
P.16
11
11
Secure back panels (11) using plastic wedges (R) and medium screws (Q).
Completed stand assembly. The following steps show the assembly and attachment of the TV mount.
P.17
Attach lateral support bar (b) to upright support bar (a) using bolts (e) and washers (f). Attach support brackets
(d) to upright support bar (a) using bolts (e) and washers (f).
Slide mounting bars (c) onto lateral support bar (b). Secure mounting bars (c) by screwing adjustment knobs
(g) into place.
Attach TV mount to stand assembly using bolts (e) and washers (f). Tighten bolts (e) with wrench (h).
|
Tascam Music Mixer Digi 001 User Manual
Technicolor Thomson Network Card SpeedTouch 121g User Manual
Thermo Products Furnace OL6FA072D48B R User Manual
Thule Automobile Accessories Kit 110 User Manual
Tripp Lite Switch B040 008 19 User Manual
Tripp Lite Switch P772 015 User Manual
Uniden Cordless Telephone DXAI685 User Manual
Vulcan Hart Hot Beverage Maker VELT100 User Manual
Vulcan Hart Kitchen Grill RRE60 User Manual
Weed Eater Lawn Mower 178704 User Manual