Video Products Computer Hardware ST WLHDMI L 30M User Manual

Aurora,Ohio 44202  
Fax: 330-562-1999  
VIDEO  
PRODUCTS  
INCORPORATED  
1275 Danner Drive  
Tel: 330-562-2622  
VPI  
ST-WLHDMI-L-30M  
ST-WLHDMI-R-30M  
Local and Remote HDMI Wireless Extender  
Installation and Operation Manual  
Local and Remote Units are each sold separately  
MAN007 Rev Date 010/28/2009  
 
TABLE OF CONTENTS  
Introduction......................................................................................................................................................................1  
Materials..........................................................................................................................................................................2  
Operation Controls and Functions ..................................................................................................................................3  
Local Unit ...................................................................................................................................................................3  
Front Panel ...............................................................................................................................................................3  
Side Panel.................................................................................................................................................................4  
Remote Unit................................................................................................................................................................4  
Front Panel ...............................................................................................................................................................4  
Side Panel.................................................................................................................................................................5  
Remote Control..........................................................................................................................................................5  
Connections.....................................................................................................................................................................6  
Technical Specifications..................................................................................................................................................7  
Troubleshooting...............................................................................................................................................................7  
Warranty Information.......................................................................................................................................................8  
TABLE OF FIGURES  
Figure 1- Front panel on Local Unit ...................................................................................................................................................3  
Figure 2- Side panel on Local Unit.....................................................................................................................................................4  
Figure 3- Front panel on Remote Unit................................................................................................................................................4  
Figure 4- Side panel on Remote Unit.................................................................................................................................................5  
Figure 5- Remote Controls.................................................................................................................................................................5  
Figure 6-Operating range of remotes.................................................................................................................................................5  
Figure 7- Cable Connections .............................................................................................................................................................6  
 
VPI WIRELESS HDMI EXTENDER  
INTRODUCTION  
The ST-WLHDMI-L/R-30M wireless HDMI transmitter (Local Unit) and receiver (Remote Unit) uses 5GHz radio technology to  
deliver uncompressed high definition video and audio up to 98 ft. (30 m) in open field, while maintaining superb, wire-equivalent  
quality and robustness. HDMI video from up to 3 sources can be transmitted to one or many receivers.  
Features:  
Crisp and clear 1080p resolution at 98 feet (30 meters) in open field, depending on environment.  
Transmits through thin walls or wooden doors.  
Supports both Unicast Mode (One-to-One, HDCP/Non-HDCP signal) and Broadcast Mode (One-to-Many, Non-HDCP  
signal only) modes.  
Local Unit:  
o
Input: Three female HDMI Type A connectors.  
Remote Unit:  
o
Output: One female HDMI Type A connector.  
Supports 480i, 480p, 576i, 576p, 720p, 1080i and 1080p resolution for HDTV displays.  
o
1080p resolution at 24 or 30 Hz, all others at 60 Hz.  
Wireless frequency range: 4.9 ~ 5.9 GHz.  
Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 standards.  
Supports the DDC2B standard for all input ports.  
Includes infrared remote controls for local unit and remote unit.  
1
 
VPI WIRELESS HDMI EXTENDER  
MATERIALS  
Materials supplied with Local Unit:  
Materials supplied with Remote Unit:  
ST-WLHDMI-L-30M Wireless HDMI Local Unit  
100-240VAC, 50 or 60Hz-5VDC/2.6A AC Adapter  
CR-67 Remote for Local Unit  
Stand  
4-Stick-on rubber feet  
This manual  
ST-WLHDMI-R-30M Wireless HDMI Remote Unit  
100-240VAC, 50 or 60Hz-5VDC/2.6A AC Adapter  
CR-68 Remote for Remote Unit  
Stand  
4-Stick-on rubber feet  
This manual  
Materials Not supplied but REQUIRED:  
HDMI-xx-MM cables for connecting Local Unit and Remote Unit to video source and display (xx = 3,6,9,14,20,30,50, 75, or 100  
feet)  
Cables can be purchased from Video Products Inc by calling (800) 626-7801 in the US and Canada or (330) 562-2622  
(worldwide).  
2
 
VPI WIRELESS HDMI EXTENDER  
OPERATION CONTROLS AND FUNCTIONS  
Local Unit  
Front Panel  
ST-WLHDMI-L-30M Local Unit- Front Panel  
4
5
6
7
Power  
Link  
HDMI1 HDMI2  
HDMI3  
Power  
Input  
ID  
1
2
3
Figure 1- Front panel on Local Unit  
1. Power: Press to turn ON/OFF the system.  
2. Input: Press to select input source (1/2/3).  
3. ID: Press to use for pairing the system or changing operating mode  
Pairing  
Pairing is performed to establish a wireless link between the Local Unit and Remote Unit. The systems are paired at the factory so  
only press the “ID” buttons if the system doesn’t link up properly on their own.  
Press the Local Unit “ID” button for 4 seconds, then the Remote Unit “ID” button for 4 seconds to pair the system.  
Unicast vs. Broadcast Modes  
The ST-WLHDMI-30M can be set to transmit a video signal to one Remote Unit (Unicast Mode) or multiple Remote Units  
(Broadcast Mode).  
Press the ID button for more than 15 sec. to switch to a different mode (Broadcast/Unicast).  
Green power LED means Unicast mode is set (factory default)  
Red power LED means Broadcast Mode is set.  
Note: It is not necessary to press the Local Unit and Remote Unit's ID button at the same time.  
Broadcast Mode Limitations  
Note: Due to the nature of the transmission, the Broadcast mode has no uplink and therefore no bi-directional  
communication between Local Unit and Remote Unit. This results in the following limitations:  
• HDCP protected content will not be transmitted.  
• CEC and EDID repeater functionalities are not supported.  
• Broadcast mode is not HDCP compliant.  
4. IR sensor: For receiving the IR signal from the remote control.  
5. Power LED: The LED will illuminate when power is ON.  
6. Link LED: When the devices are searching for each other, the Link LED will flash rapidly. While a link is being established, the  
Link LED will flash slowly. Once the link is established the Link LED stays ON solid.  
7. Input indicator: The LED will illuminate to indicate which input source is selected.  
3
 
VPI WIRELESS HDMI EXTENDER  
Side Panel  
8. HDMI 1/2/3 Inputs: For connecting to the HDMI output of your source equipment such as DVD player or set-top-box. Up to 3  
different HDMI sources can be connected.  
9. Power: Plug the 5VDC power supply into this unit and connect the adapter to AC wall outlet.  
ST-WLHDMI-L-30M Local Unit- Side Panel  
DC 5V  
+
-
HDMI3  
HDMI2  
8
HDMI1  
9
Figure 2- Side panel on Local Unit  
Remote Unit  
Front Panel  
ST-WLHDMI-R-30M Remote Unit- Front Panel  
3
4
5
Power  
Link  
Power  
ID  
1
2
Figure 3- Front panel on Remote Unit  
1. Power: Press to turn ON/OFF the system.  
2. ID: Press to use for pairing the system or changing operating mode  
Pairing  
Pairing is performed to establish a wireless link between the Local Unit and Remote Unit. The systems are paired at the factory so  
only press the “ID” buttons if the system doesn’t link up properly on their own.  
Press the Local Unit “ID” button for 4 seconds, then the Remote Unit “ID” button for 4 seconds to pair the system.  
Unicast vs. Broadcast Modes  
The ST-WLHDMI-30M can be set to transmit a video signal to one Remote Unit (Unicast Mode) or multiple Remote Units  
(Broadcast Mode).  
Press the ID button for more than 15 sec. to switch to a different mode (Broadcast/Unicast).  
Green power LED means Unicast Mode is set (factory default)  
Red power LED means Broadcast Mode is set.  
Note: It is not necessary to press the Local Unit and Remote Unit's ID button at the same time.  
Note: See also “Broadcast Mode Limitations” on previous page.  
3. IR sensor: For receiving the IR signal from the remote control.  
4. Power LED: The LED will illuminate when power is ON.  
5. Link LED: When the devices are searching for each other, the Link LED will flash rapidly. While a link is being established, the  
Link LED will flash slowly. Once a link is established the Link LED will stay ON solid.  
4
 
VPI WIRELESS HDMI EXTENDER  
Side Panel  
ST-WLHDMI-R-30M Remote Unit- Side Panel  
DC 5V  
+
-
HDMI OUT  
7
6
Figure 4- Side panel on Remote Unit  
6. HDMI Input: For connecting to the HDMI input of your display.  
7. Power: Plug the 5VDC power supply into this unit and connect the adapter to AC wall outlet.  
2
2
POWER  
ID  
POWER  
ID  
Remote Control  
1
1
3
1
2
3
1. Power: Press to turn ON/OFF the device (Local Unit or Remote Unit)  
2. ID: used the same as described in “Local Unit Side” or “Remote Unit Side” sections  
3. 1~3: Input source selection  
Transmitter or Receiver  
Transmitter CR67  
Receiver CR68  
3 Meters  
30  
3 Meters  
7 Meters  
Figure 5- Remote Controls  
30  
POWER  
ID  
Remote  
Control  
Figure 6-Operating range of remotes  
5
 
VPI WIRELESS HDMI EXTENDER  
CONNECTIONS  
UNICAST Configuration  
ST-WLHDMI-L-30M Local Unit  
ST-WLHDMI-R-30M Remote Unit  
HDTV  
PS3, DVD Player,  
Blu-Ray  
HDMI-xx-MM  
HDMI-xx-MM  
BROADCAST Configuration  
HDMI-xx-MM  
ST-WLHDMI-L-30M  
Receiver (1)  
Pow er  
Link  
HDTV  
CWHDI-RX Receiver  
Pow er  
ID  
ST-WLHDMI-L-30M  
Transmitter  
ST-WLHDMI-L-30M  
HDMI-xx-MM  
Receiver (2)  
Pow er Link  
Power Link  
HDMI1 HDMI2 HDMI3  
HDTV  
HDTV  
Pow er  
CWHDI-RX Receiver  
ID  
Power  
Input  
ID  
CWHDI-TX Transmitter  
ST-WLHDMI-L-30M  
Receiver (3)  
PS3, DVD Player,  
Blu-Ray  
Pow er  
Link  
CWHDI-RX Receiver  
Pow er  
ID  
HDMI-xx-MM  
HDMI Type A  
Male  
HDMI Type A  
Male  
HDMI-A-Male  
HDMI-A-Male  
(3,6,14,20,30,50,75 and 100 foot cables available)  
Figure 7- Cable Connections  
6
 
VPI WIRELESS HDMI EXTENDER  
TECHNICAL SPECIFICATIONS  
Video Data Rate  
Frequencies Supported  
Bandwidth  
1.5Gbps  
4.9~5.9GHz  
20MHz  
Wireless Range  
Operating Temperature  
Resolution  
15-30 meters open field  
0°C ~ 40°C  
480i/p, 576i/p, 720p, 1080i @60Hz, 1080p @24/30Hz, VGA @60/72Hz, SVGA @60/72Hz,  
XGA@60/70Hz  
Video Connectors  
Inputs 3 HDMI Type A Female (Local Unit)  
Output 1 HDMI Type A Female (Remote Unit)  
5VDC, Local Unit: 1.6A, Remote Unit: 1.3A  
100-240VAC, 50 or 60Hz-5VDC/2.6A AC Adapter  
Local Unit: 0.6 lb., Remote Unit: 0.6 lb.  
6.4 x 6.5 x 1.3 inches  
Power Consumption  
Power Supply  
Weight  
Size (In.) WxDxH  
Chassis Material  
Approvals  
Plastic  
UL, (c)UL ( Power Adapter Only )  
CE, RoHS  
TROUBLESHOOTING  
Each and every piece of every product produced by Video Products Inc is 100% tested to exacting specifications. We make  
every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this  
product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise. If the  
answer is not found in the chart, please check the FAQs (Frequently Asked Questions) at our website at http://www.vpi.us or  
contact us directly for help at 1-800-626-7801 in US & Canada or 1-330-562-2622 worldwide. We will be happy to assist in any  
way we can.  
Problem  
Solution  
Check to see if the correct AC adapter is being used-  
Power LED does not illuminate  
when power is ON.  
5VDC 2.6A  
Check all power connections are plugged-in correctly  
Push the power buttons to turn ON Local Unit and Remote Unit.  
The Link LED will flash while the unit is pairing or learning. After pairing is complete  
and the Local Unit and Remote Unit are linked, the LED will illuminate solid.  
After powering on Local Unit  
and Remote Unit, the Link  
LED is flashing rapidly / slowly  
without image.  
If the LED keeps flashing rapidly for more than 3 minutes, try pairing the devices by  
pushing the ID buttons on each unit for 4 seconds.  
If the LED keeps flashing slowly for more than 3 minutes, check the Local Unit input  
selection, make sure the video source is ON and make sure the display is ON.  
The Link LED is illuminating  
consistently without image display  
or unexpected image display.  
Check if the video source’s timing is supported by the device. The ST-WLHDMI-30M  
supports up to 1080i @ 60Hz and 1080p @ 24/30Hz. Make sure the video source is  
sending acceptable timing to the extender and display. Also make sure the display can  
accept that timing.  
Check if both the video source and display are HDCP/CEC compliant.  
Check if display mode is properly selected.  
Check if both the video source and display cables are securely connected  
Input LED will not illuminate  
When linking the first time, the input LED will not illuminate unless the display is connected  
and powered ON. Make sure the display is connected and powered.  
Local Unit and Remote Unit have  
different colors on their Power  
LED  
Local Unit and Remote Unit are in different operating modes. Green indicates Unicast  
Mode, Red indicates Broadcast Mode. Press the ID button of the unit that is set for the  
wrong mode for 15 seconds to change it to the desired mode.  
7
 
VPI WIRELESS HDMI EXTENDER  
WARRANTY INFORMATION  
The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Video Products  
Incorporated at (800) 626-7801 (800-RGB-TECH) or (330) 562-2622 or visit our website at http://www.vpi.us for information  
regarding repairs and/or returns. A return authorization number is required for all repairs/returns.  
PRODUCT  
SERIAL NO.:  
DATE:  
INSPECTED BY:  
MAN007 Rev. 10/28/09  
8
 

Taylor Scale 5742 User Manual
Tekxon Technology Ventilation Hood AWG2021 User Manual
TERK Technologies Automobile Accessories 138P005 User Manual
Timex Watch W206 User Manual
Trion Dust Collector DC Cyclone User Manual
Uniden Network Card Data 2000 Wireless CDPD PC Card User Manual
Universal Remote Control Universal Remote MRF 300 RFX150 User Manual
Vialta Digital Photo Frame VF 100 User Manual
ViewSonic Digital Photo Frame DP701W4 User Manual
VTech Handheld Game System v motion active learning system User Manual